MODELS

Please note: If you send me a picture to include with your advert include the words "Model Engineer Advert" somewhere in the subject. Failure to do that will likely result in my SPAM filters deleting it before I get to see it! Thanks.

#789
Posted: OCTOBER
FOR SALE:  black fives,(2)1 lms gloss black excellent condition, original 
boiler cert. built1966 steamed only a few times £2,750.other one is br black,
lined also eixcellent condition has original boiler cert.both locos are 
31/2"gauge. i also have 5"gauge b1 in br black brand new with new boiler cert.
£4'250.for details of the above locos please phone 01738860126.

neil, PERTH. SCOTLAND, 01738860126 
email reserved
******************************************************************************
#788
Posted: OCTOBER
FOR SALE:  black fives,(2)1 lms gloss black excellent condition, original 
boiler cert. built1966 steamed only a few times £2,750.other one is br black,
lined also eixcellent condition has original boiler cert.both locos are 
31/2"gauge. i also have 5"gauge b1 in br black brand new with new boiler cert.
£4'250.for details of the above locos please phone 01738860126.

neil, PERTH. SCOTLAND, 01738860126 
email reserved
******************************************************************************
#787
Posted: OCTOBER
FOR SALE:  Foden steam wagon 3 inch scale (artic), copper boiler. 
This engine as only been test run 5 times, It is in excellent condition. 
As I am not really a steam enthusiast,the engine is all boxed up and not being 
run.The engine came to me part finished, which I then paid to have completed. 
£3250.

Bob Winder, Preston  Lancs 
rjwinder28 _ AT _hotmail.com
******************************************************************************
#786
Posted: OCTOBER
FOR SALE:  Sale of  Miniature steam engine and equipment, due to ill 
health,To be sold as a complete set up, consisting of:-   

Foster 4" Traction Engine, built 1988, retubed last year, boiler test till 
oct 05. Road reg, Taxed till Nov 04. ( Name of engine "Taurus")with all firing 
kit. 

2x Ride on two wheel Trailers, 1x Flatbed 4 wheel trailer, 1x Timber trailer 
single pole 4wheel, 1x Generator ( belt driven)c/w Lights... 1x Ford Transit 
van 190 lwb High Top 1993 K reg taxed till March 05, Mot till Feb 05, Fully 
kitted out with ramps, 3.1/2 ton winch,with battery on split charge system. 
New Rad, Battery, Waterpump, Clutch, and Rear axle rebuilt last year, Fitted 
with Shockbox Towbar, Must go as a complete lot, £12,000 Firm. Pictures not 
available yet. (Caravan also available)

Mike Mortimer, Hungerford, 01488682148 
m.mortimer _ AT _btinternet.com
******************************************************************************
#785
Posted: OCTOBER
FOR SALE:  POLLY IV. This loco was purchased ready built from the 
factory and is in excellent (as new) condition. I am advertising it for a 
member with no internet access so contact Jim Hughes direct on 01642 677232. 
Price asked is £4800 ono. or may (part)exchange for a tank loco 

If you E-mail me on sue-jim-white at ntlworld dot com it may take some time 
for me to respond.

Jim White, M'bro NE England 
sue-jim-white at ntlworld.com
******************************************************************************
#784
Posted: SEPTEMBER
FOR SALE:  5" Guage class 27, battery electric locomotive, BR Green 
livery, 54" long x 9" wide,  excellent runner £1,700.00. or swop for class 37,
31 or 08 shunter.                     

Keith, Wirral  cheshire, 0151-348- 4108		 
keith.parks2 _ AT _virgin.net
******************************************************************************
#783
Posted: SEPTEMBER
WANTED:  bassett lowke gauge one steam any condition loco or collection 
particularly atlantic or lnwr models wanted by private collector to restore 
and run please ring ken 07760 346796 anything lurking in your attic!!

ken browne, WORTHING, 07760 346796 
ken.browne1 _ AT _BTINTERNET.COM
******************************************************************************
#782
Posted: SEPTEMBER
WANTED:  IC engine, multi cylinder prefered but not essential,finished 
item if possible, the age of item is not important, can you please help.   
if you have such an engine in your possession and no longer require it please 
contact me by phone or e/mail with pictures if possible. may consider radial 
aero type engine.   keith  0151 260 8401

keith, liverpool, 0151 260 8401 
plan23 _ AT _msn.com
******************************************************************************
#781
Posted: SEPTEMBER
WANTED:  7.25 gauge Narrow gauge type loco such as Romulus or Hunslet 

Martin Hainesm, Taunton, 07778 431399 
martinhaines _AT_ aol.com
******************************************************************************
#780
Posted: SEPTEMBER
FOR SALE:  5"gauge "SWEETPEA" tender engine.0-4-2.Exhibition standard-
good club runner.Email for pictures. 

graham, birmingham 
jgj _AT_ antiques26.freeserve.co.uk
******************************************************************************
#779
Posted: SEPTEMBER
WANTED:  6" scale traction engine, all types considered. Must have 
good boiler, current certificate and be of good construction.

Shaun Pearce, Peterborough 
shaun _AT_ pearcehire.co.uk
******************************************************************************
#778
Posted: SEPTEMBER
WANTED:  Any finished or part-built models of South African Railways 
locomotives, especially the 4-8-2s or 4-8-4s in 1" scale (3.5" gauge), but 
anything considered. 

Andrew, Windsor UK, 0776 123 3882 
gbAndGif _AT_ europe.lego.com
******************************************************************************
#777
Posted: SEPTEMBER
FOR SALE:  7.25" Gauge 0-4-0 12volt 3/4HP electric loco. Vac brakes 
for rolling stock. Disc brakes on the loco which has lights and Parkside 
electronics. £1200 ovno. Photo available. 

B.Tully, Wantage. Oxon., 01235 868498
email reserved
******************************************************************************
#776
Posted: SEPTEMBER
FOR SALE:  5" Gauge Corris/Tal-y-llyn 0-4-2ST No. 4 'Edward Thomas' 
built 1971 with Southern Federation Boiler Certificate to June 2006.  
Optional Giesl Ejector.  Twin axle pumps, injector, additional water capacity.  
Nicely made - not from proprietory castings by skilled model engineer.  
I am selling 'Edward' with a heavy heart but I can no longer operate the 
locomotive due to ill health so I cannot consider other than a straight 
forward sale.  OIRO £4500.

Frank Spence, Southend on Sea,  UK, 01702 586454 
frank at spence4079 dot freeserve dot co dot uk
******************************************************************************
#774
Posted: SEPTEMBER
FOR SALE:  I am looking for a really good example of a B.R.Standard 5 
tender loco (73xxx) live steam model in 5 inch gauge. 

Really good price paid for a well built model. If you have one you might 
consider selling,or know of one for sale,please get in touch. 

Laurence Blundell, Burton on Trent 
LaurenceBlundell _AT_ aol.com
*****************************************************************************
#772
Posted: SEPTEMBER
WANTED:  looking for  7 1/4 locomotives either steam or electric  
or any rolling stock/bogies/ rails ect  

david, Herts, 07957 288661  
westway21 _AT_ hotmail.com
*****************************************************************************
#771
Posted: SEPTEMBER
WANTED:  I would like to buy a finished 5" gauge battery loco, 
a maxitrax Rushton or a R-o-R Trojan would be fine but I only have £750 as 
my budget. Can anyone help?

Ray, London, 07740343801 
ray.arm _AT_ ntlworld.com
*****************************************************************************
#770
Posted: SEPTEMBER
FOR SALE:  Maxwell Hemmings Showman Traction Engine complete in good 
excellent condition. photos available via e-mail.Thanks 

Roy Burton, Ayrshire UK 
roy.burton5 at btinternet dot com
*****************************************************************************
#769
Posted: SEPTEMBER
WANTED:  model marine steam plant complete and in good working order 
suitable for either a Victorian launch or early paddle steamer model size 
length 46" with a beam of 10" gas fired,please E-mail photos and price to :- 

Roy Burton, Ayrshire UK 
roy.burton5 at btinternet dot com
*****************************************************************************
#768
Posted: SEPTEMBER
FOR SALE:  Hornby Railways Stephenson Rocket, real steam train set 
complete with 25ft of track (3 gauge model) still boxed. There is also an 
accompanying G104 Coach for use with the locomotive. 
The locomotive kit includes the following: 
Rocket Loco and Tender 
25ft of track (will form and oval) 
Separate gas fuel tank 
Filler funnel 
Multi purpose tool 
Comprehensive Leaflet 
P.O.A.

HORNBY G104 Coach to go with the Stephenson Rocket Loco. Very Rare and in 
very good condition - still in original box. Images available. 
P.O.A.

Graham Turner, Sheffield, UK 
grahamturner_id at hotmail dot com
*****************************************************************************
#767
Posted: SEPTEMBER
WANTED:  I m still looking for a 3½  or 5  gauge loco finished or 
unfinished, painted or unpainted but must be working and with current boiler 
certificate. Has to be a small loco if 5 . Prefer GWR. Must have 
dimensionally accurate outline of the prototype, i.e. look right. 
Not worried about details, I can add them later.

Tony, Somerset 
oto.1 at btinternet dot com
*****************************************************************************
#765
Posted: SEPTEMBER
WANTED:  Simplex/super simplex. In working order with boiler cert for 
new starter. max budget £1'600 

phil, Ipswich, 07747738914 
philself AT hotmail dot com
*****************************************************************************
#764
Posted: SEPTEMBER
WANTED:  6" scale live steam Sentinel/Atkinson steam waggon with 
current boiler certificate. Good condition required. 
Good price will be offered for an excellent example. 
Purchaser has many years experience in steam engines.   
Will reply to all bona fide advertisers. 

R BA . Robinson, Preston. Lancs. uk, 01253 790692 
Rsmokeyrod _AT_ aol.com
*****************************************************************************
#763
Posted: AUGUST
WANTED:  Stuart Turner Petrol,Diesel, & Gas engines also lighting sets. 
I am trying to build up a collection of Stuart Turner engines & lighting sets 
prior to emigrating next year.In particular I am interested in a Stuart 600 
open crank, Type R engine or lighting set, Type H diesel engine,& type N 
engine or lighting set. I am also interested in other Stuart engines with the 
exception of the twin cylinder ones. Would also be interested in any spares. 

Robin Jackson, Southport. UK. 01704 536661 
rj23asaunders _ AT _aol.com
*****************************************************************************
#762
Posted: AUGUST
WANTED:  I am looking for a model of the 3.5 inch gauge 'Lilla' or 
'Conway' 0-4-0T narrow gauge steam loco. It needs to have a current, or very 
recently expired boiler certificate. 

Steve Thomason, Cambridgeshire 
thomsk _ AT _btinternet.com
*****************************************************************************
#***
Posted: AUGUST
NOTICE:  Stolen Models:

Please beware being offered for sale the stolen models (Traction engine and two 
locos) and other equipment as listedon my website: 
http://www.stationroadsteam.com/stolen%2026-8-2004.htm

Many thanks, 
Mike Palmer
www.stationroadsteam.com
*****************************************************************************
#761
Posted: AUGUST
FOR SALE:  7 1/4 gt western 2.6.2 tank loco copper boiler but has a 
water leak in the smoke box end should be easy job for boiler maker quick 
sale req £1500.00 o.n.o 

*SOLD*
******************************************************************************
#760
Posted: AUGUST
FOR SALE:  31/2" Royal Scot very fine workmanship current boiler cert.
£2000, GWR saddle tank super little engine current boiler cert.£1750, 
4-6-2 tank loco "william" all platework in brass absolutely superb current 
boiler cert. £1950 house move forces sell

Gzara, Cheltenham Spa, 01242-571273 
email reserved
******************************************************************************
#759
Posted: AUGUST
FOR SALE:  maxitrak ruston,factory built special with north british 
bonnet,pillar cab,new battery also 4 wheel driving truck with disc brakes 
£900ono 
maxitrak bogie open wagon with removable seat £250        

jez kirkwood, gloucestershire, 07940643480 
kirkwoods //AT// onetel.com
******************************************************************************
#756
Posted: AUGUST
WANTED:  simplex with boiler cert max budget £1,600 will travel or 
collect

james, manchester, 01706 627136 
mr.manes _ AT _btinternet.com
******************************************************************************
#754
Posted: AUGUST
FOR SALE:  Class 20 battery eletric loco fitted with a parkside 
100amp 24 volt controler and trax two tone horn unit This is only one of 4 
ever built and is scratched built. offers around £1650ono.for more details 
and photo email me  

*SOLD*
******************************************************************************
#750
Posted: AUGUST
WANTED:  3.1/2" gauge Great Western 2-6-0 Mogul.Number 9304.It had a 
slightly out of scale cab and was fitted with a 4,000 gallon tender. Can 
anyone help me to trace this locomotive built by my Father in the early 1950,s. 
It was last known to be owned by a Mr. Simmons, who used to run the Red Lion 
public house, at Blackwater near Redruth in Cornwall. It was known to be in 
his pocession in the mid 1960,s. Any help would be greatly appreciated. 

T. Head, Exeter., 01392 467457 
cssgroupltd //AT// aol.com
******************************************************************************
#743
Posted: AUGUST
FOR SALE:  3.5" GNR atlantic loco LBSC Masie in steam new boiler test 
£1500 photo available on request 

nigel, Barnstaple uk, Barnstaple uk 
wayside //AT// nicolahamdi.fsnet.co.uk
******************************************************************************
#742
Posted: AUGUST
FOR SALE:  Compleate "Threshing Set" in 3" scale. Comprising Allchin  
"Royal Chester" engine. The drum is a "Garrett". The Jackstraw is a "Foster".  
The engine as only been steamed when first made since which it as been run on  
electric to display at rallies. Comes with all display tables, ramps, whinch  
and twin axle trailer for transporting the set. All for the sum of £20,000. 
Please see photo. 

Click for pic...
  
Please phone for more information Norman on 01507 523204 (Horncastle}  
This ad is for one of our members without internet.  

Norman Melton, Horncastle, 01507523204
email reserved
******************************************************************************
#741
Posted: AUGUST
FOR SALE:  Two well built 7 1/4 inch gauge bogie passenger trucks to 
narrow gauge profile. Truck #1; 8 ft long, 19 ins wide, sit in style for 3/4 
adults. Upholstered seats. Steel chassis with stainless steel floor plate, 
plywood body, spring buffers. Bogies are fabricated arch bar type both air 
braked with SMC compact cylinders dual pressure 20 psi on/ train pipe pressure 
25psi off. 
  
Truck #2; 7ft 6 ins long, 19 ins wide, sit in style 3 adults. Steel chassis 
with stainless steel floor plate, plywood body, spring buffers. Bogies are 
plate type one air braked with diaphram cylinder. The bogies are removable and 
the body shaped so that it can be secured in to Truck #1 for compact 
transportation/storage. 

£1500 for both. Will not split. Viewing Doncaster/Scunthorpe area. 

Dave Croft, South Yorks, 07831 139 170 any time
email reserved
******************************************************************************
#739
Posted: AUGUST
WANTED:  Does anyone have a Hot Air engine for sale?    
I am interested in anything from a toy engine to a "real" engine!

Lexie Keady,  
vans //AT// iol.ie
******************************************************************************
#737
Posted: AUGUST
FOR SALE:  Stoke on Trent Model Engineers Ltd 
Shortly the assets of this Society will be available for sale. Consisting of 
a seven and a quarter inch gauge miniature railway. It has been a very 
successful railway carrying a minimum of 20,000 passengers per year. 
  
The railway consists of the following: 
Approx. three quarters mile of track, sleepers, left & right hand points with 
cast iron frogs, electro pneumatic point motors, level crossing gates, signal 
system, hydraulic lift of 1 tonne capacity with 24 volt operation for 
locomotive loading and unloading. 

Locomotive turntable. 
40'L x 8'W x 8'H steel container, insulated,wired and fitted with electric 
lighting and power. Work bench and three runs of track for storage of locos 
and passenger coaches. High security locking system with PIR alarm. 

Diesel outline loco. Driven through Kubota 2 cylinder diesel engine driving 
hydraulic pump and motors with chain drive to 4 axles. This is a powerful loco 
capable of high passenger loads and an intensive operation. 

Steam loco Denver and Rio Grande "Old Rube" 2.8.0 
Steam loco "Waldenberg" 1/3rd scale. 0.6.0 
Electric loco 24volt Denver and Rio Grande diesel outline. Battery Charger. 
8 sit astride passenger coaches with vacuum braking (2 with air and vacuum) 
Station building, brick, steel and steel plastic coated cladding with 2 
platforms approx.80' long. 
A quantity of new unused rail as per track specification with new wooden 
sleepers.   

Click for pic 1...
Click for pic 2...

Mr Ron Carman, Stoke on Trent, 01782 785225 
eberesford //AT// briteuropean.co.uk
******************************************************************************
#736
Posted: AUGUST
WANTED:  10.1/4 Or 7.25 Loco for railway in kent 

jhon, kent 
chriswq157123786 //AT// aol.com
******************************************************************************
#731
Posted: JULY
FOR SALE:  5" Gauge, BR Standard 80000 Class 4MT Tank Locomotive, 
2-6-4, BR Black, Current Boiler Certificate, Injector, axel driven pump, 
double action hand pump, Stainless ash pan, twin sight glasses, copper 
silver soldered boiler, Rare Loco built to works drawings, powerful and 
proven steamer. Please call for more details.

*SOLD*
******************************************************************************
#730
Posted: JULY
FOR SALE:  3 1/2" hunslette designed by Don Young, 18 months boiler 
certificate, good runner, £1200 ono

*SOLD*
******************************************************************************
#729
Posted: JULY
FOR SALE:  3.5" Gauge Mountaineer. Superb condition, current southern 
fed certificate.  Can email pics and further details £3500 ono.

Chris Giles, Dymchurch, Kent, UK, 01303 874866 
chris _AT_ gilesy.co.uk
******************************************************************************
#726
Posted: JULY
FOR SALE:  3.5inch gauge juliet,built to average standard goes well, 
boiler cert till march 2005,12v steam blower,shovel and building plans £650 ono

*SOLD*
******************************************************************************
#725
Posted: JULY
FOR SALE:  Hillen Lassie for sale exelent condition brand new sothern 
fed boiler cert.baker valve gear with stepenson inside for 3rd cylinder, axel 
pump and hand pump and all pipe work on place to fit an injector.steams well 
with a working pressure of 80psi and runs smoothley. there is very little ware 
on the motion or on the loco in general.im asking £2100 ovno and can email photos. 

mark, dartford, 07739104579 
marklane //AT// lanem.fsworld.co.uk
******************************************************************************
#724
Posted: JULY
FOR SALE:  3/4 Scale Virginia 4/4/0 live steam engine - all casting in 
kit along with book and plans - boiler complete - framecomplete w/cylinders 
and quatered deivers and axel pump - all the hard stuff is done - also have 
gauges and valves for boiler - nice workmanship!

Dale Gash, Otto, NC, (706) 746-5142 
gashtool //AT// alltel.net
******************************************************************************
#723
Posted: JULY
FOR SALE:  WALLIS and STEEVENS 4.5 scale live steam road roller.
named ...BECKY...Built to exhibition standard between 1992-1996,Lovely green 
coachwork and lined in cream ,Silver soldered copper boiler,Only ran on air 
hence pristine condition,Can be shown running on air also.tested in 1996 now 
expired,included is a drivers truck in matching colours,build pictures ,
full plans and books,,Many pictures available just ask,first here will buy for 
sure
£5250 ,May p/x a nice live steam Loco must be in same condition cash either 
way Tel 0781 123 1984 or

karl, lancashire, 01706 827947 
bobodunn18 //AT// aol.com
******************************************************************************
#722
Posted: JULY
FOR SALE:  5" x2 riding trolleys, one drivers type with brake the 
other passenger type £75 each. 
21/2" Flying Scotsman superb with boiler cert. £850

Daniel, West Country, 07749759599 
email reserved
******************************************************************************
#721
Posted: JULY
WANTED:  Narrow gauge on 5 inch loco. Must traverse 12-14 feet radius. 
UK, USA or colonial outline. Hunslet,Edward Thomas,Waril,Marie E, Sweet Pea 
open cab or variants considered. Cash available for suitable engine in good 
condition with boiler certificate.

Graham Harding, Worcestershire, 01905 381 335 
gharding //AT// wyenet.co.uk
******************************************************************************
#720
Posted: JULY
FOR SALE:  Newly completed 5 in ggauge Trojan battery loco. powder 
coated body and chassis. 4QD controller and leisure batteries included. 
good powerful runner, but the steam bug has bit! 
£920, or px for small steam loco, eg Polly or Simplex 

Jerry Turner, Lichfield, staffs, 01543 491485 
jerry.turner //AT// tesco.net
******************************************************************************
#719
Posted: JULY
WANTED:  Small battery electric loco for 5" narrow gauge railway.  
Maxitrak Ruston or similar loco in good working order would be ideal.  
Cash purchase.  

E More, Surrey, UK 
more.rail //AT// virgin.net
******************************************************************************
#717
Posted: JULY
FOR SALE:  due to berivement 5" scale great western 262 45xx locomotive 
full rivet detail complete with drawings driveing trailer, tools, fan, oil and 
coal,beutifull condition done little running

loco with tools driveing truck i.e full package £3900. 

*SOLD*
******************************************************************************
#716
Posted: JULY
WANTED:  71/4"gauge diesel outline loco (class47,33)or something 
simialar, engine must be powerful to pull 2 coaches of people (4/6 motors), 
don,t mind something that needs restoring as cannot afford a great deal of 
money to spend. as due to ill health cannot work.
please telephone me on 01235 772331 or e-mail 

tony, oxon, 01235772331 
amandandtony //AT// borderterrier.freeserve.co.uk
******************************************************************************
#710
Posted: JUNE
WANTED:  5" gauge narrow gauge engine - quarry Hunslet or 
"Edward Thomas" (not a "Sweat Pea" variant as I've got one of these.  
Good runner wanted for youngster to learn on whilst I finish mine. 

Roger Melton, Salisbury, 01980 556621 
roger.melton [AT] protherics.com
******************************************************************************
#709
Posted: JUNE
WANTED:  7.25"gauge diesel or petrol heavy locomotive.Powerful and 
reliable model required that will pull a heavy passenger load for lengthy 
periods.New or nearly new preferred.

graham, birmingham 
jgj [AT] antiques26.freeserve.co.uk
******************************************************************************
#707
Posted: JUNE
FOR SALE:  5" Gauge Sweet Pea. Good order throughout. Axle pump and 
steam pump, spark arrestor included.  Fully enclosed carrying/storage box. 
£2500 

Derek Waldron, Sittingbourne, Kent, 01795 522556 
derek [AT] whiplash.freeserve.co.uk
******************************************************************************
#706
Posted: JUNE
FOR SALE:  4 inch Foster Agricultral Traction Engine. A older model that 
is used. To Live Steam models design.Not one for eating your dinner off of 
Current boiler certificate until May 2005. Also road reg on a Q plate. Can be 
seen in steam at Banbury rally 26/27 June 2004. Hopefully the link below will 
take you to a picture of it. Other pictures available upon request. In West 
London. Price will also include a box trailer that has been fully overhauled 
in the last two years.  
  
http://photos.groups.yahoo.com/group/scalemodeltractionengines/vwp?.dir=/&.src=gr&.dnm=Lady+Jayne.jpg&.view=t&.done=http%3a//photos.groups.yahoo.com/group/scalemodeltractionengines/lst%3f%26.dir=/%26.src=gr%26.view=t  

Kevin Munn, Hayes Middx 
kevin_steamchat at yahoo.co.uk
******************************************************************************
#705
Posted: JUNE
FOR SALE:  hello, i have a 3 1/2 gauge "miss Ten-To-Eight" the engine 
is a good runner full boiler certificate, this is a RARE model, as i have only 
seen 1 other. I am asking £1995 for the engine, buyer collects and if u wish 
the engine can be in steam. email for a picture 

Paul Pavier, Southport 
b.pavier [AT] tiscali.co.uk
******************************************************************************
#702
Posted: JUNE
FOR SALE:  3-1/2" welsh narrow guage quarry engine "CONWAY",copper 
boiler with current cert. only steamed 3 times superb engineering £1750 

Daniel, welsh borders, 07749759599 
sweatybetty992000 [AT] yahoo.com
******************************************************************************
#701
Posted: JUNE
FOR SALE:  1" scale 'MINNIE' Traction Engine. This model is no longer  
capable of being steamed and is therefore offered as a static display or  
collectors model. Runs well on 15 - 20 psig air from a small compressor. 
Nicely restored, rebuilt and repainted to good standard. £750 o.n.o.

*SOLD*
******************************************************************************
#698
Posted: JUNE
FOR SALE:  Stuart D10 twin cylinder vertical stationary engine.  
0.75" bore. 0.75" stroke.  The Stuart D10 is well suited to all kinds of 
stationary and marine work, being able to reach speeds of up to 2000 rpm.  
Please phone for any more info you require. 

David, Glasgow, 0141 616 3700 
dasapple !AT! cqm.co.uk
******************************************************************************
#695
Posted: JUNE
WANTED:  Pacific loco in 3.5 or 5 inch guage required possibly gresley 
a2/a3 or prairie v2,  Brittania or WHY goodprice paid please ring 01548 821391

jeff wilde, devon uk, 01548821391 
novahwood _AT_ msn.com
******************************************************************************
#691
Posted: JUNE
FOR SALE:  5" guage Firefly (GWR 4500 class) loco to Martin Evans 
dseign. Full rivet detail. Unsteamed since professionally painted. £5,000.

John Todd, Peterborough, 01733 334239 
jptodd _AT_ tesco.net
******************************************************************************
#687
Posted: MAY
WANTED:  3 1/2" gauge Greene King, Clarkson King Arthur or Greenly Lord 
Nelson. Model must be complete or close to finished with sound useable boiler.

Andy, Hampshire, 07973 627730 
andya _AT_ beeb.net
******************************************************************************
#686
Posted: MAY
FOR SALE:  4" Scale Garrett Traction Engine Single Cylinder 7nhp.  
New (justcompleted). Rubber Tyres.  12 months test certificate. 
£14950.  

*SOLD*
******************************************************************************
#685
Posted: MAY
WANTED:  5" Gauge Streamline Coronation Scott for serious modeller. 
Must be in good order. 

Richard Harvey, Dorset,  
rharvey _AT_ exchequer.com
******************************************************************************
#683
Posted: MAY
FOR SALE:  2" scale Durham & N. Yorkshire traction engine built to the 
design of John Haining. Model completed in 1999 and has been tested and steamed 
by previous owner, but has no current boiler certificate. This is a nicely 
finished model which has had very little use. Included will be the full set of 
original drawings. genuine reason for selling (to finance next project) 
Please email for pics £3950. 

*SOLD*
******************************************************************************
#681
Posted: MAY
WANTED:  5 inch gauge rolling stock in any condition.

Wilf, South Yorks., 01246 234724 
wilf _AT_ lindley6005.freeserve.co.uk
******************************************************************************
#679
Posted: MAY
FOR SALE:  GAUGE ONE STEAM;midland compound nearly finished requires 
only side steps rear buffers and detail;plus  fettling up ie adjustment  to 
regulator and blower;two inside cylinders;meths fired;all brass with 
stainless steel boiler very straight and well engineered ;has water gauge 
and pressure gauge;was much admired when steamed at recent gimra group genuine 
reason for sale;bargain at£850 ken 07760 346 796  01903 505820 

*SOLD*
******************************************************************************
#678
Posted: MAY
FOR SALE:  3.5" Alco 'Mountaineer' Stunning Loco in perfect order. 
 
Faithful replica of the war departments loco, in Ffestiniog railway livery. 
Current Southern federation boiler certificate.  Twin injectors, steam chest 
pressure gauge, hand pump. Everything works well, have had loco in steam for 
over 8 hours in one session, will pull anything. If you wish to know anyting 
specific please contact me.  I can arrange a test steaming by appointment.  
Can deliver in UK by arrangement 
 
£4500 ovno Further pics and movie clips (avi) available on request 

Chris Giles, Dymchurch, Kent, UK, 01303 874866 
chris _AT_ gilesy.co.uk
******************************************************************************
#677
Posted: MAY
FOR SALE:  I have for sale a superb model of a 31/2"gauge lynton & 
Barnstaple 2-6-2 narrow gauge locomotive it is complete, steamed only a few 
times needs boiler test & some time spent to get injectors to pic up correctly 
a very nice item please no dealers £5000 ovno please email for pics if interested 
 
i am looking for a 71/4" caledonia a model of the locomotive used on the 
Isle of man railway please let me know if you have one for sale or any 
interesting large 71/4" loco 

colin, birmingham 
Landjet _AT_ aol.com
******************************************************************************
#676
Posted: MAY
WANTED:  Hello, I have always wanted a Traction engine but I do not have 
the time nor patience to build one.  I can do some work myself and have access 
to all engineering facilities (and limited money) - I have built quite a few 
stationary engines, the simpler ones! - so would prefer somthing well used, 
in need of refurbishment, paint, minor work, etc.  I can only really afford 
1 inch or 1 1/2 inch max.  This is for myself and wife to use for our own 
personal pleasure so as long as it is sound a boiler certificate is not needed. 
Please email jason _AT_ classicbiking.co.uk Thank you. I will reply to you all. 
Devon area prefered.

Jason, Devon, 01395 263445 
jason at classicbiking.co.uk
******************************************************************************
#674
Posted: MAY
FOR SALE:  5" gauge Don Young designed quarry Hunslet for sale. 
Superb condition and little used. I have steamed her twice since last year's 
boiler test. She is too good to use so little so reluctantly selling. 
 
2 injectors (one needs minor attention) and hand pump - no cross-head driven 
pump. Steams well, good runner. 
 
See my website for photos, specifically: 
http://www.worldrailfans.org/GardenRailway/SLRlocos.shtml 
 
I do not have a car large enough to move her so buyer to inspect and arrange 
collection from my home. 
 
£3000 
Would prefer contact by email at first.

*SOLD*
******************************************************************************
#673
Posted: MAY
FOR SALE:  5" gauge gwk king john complete rolling chassis including 
cylinders & boiler requires bushes complete tender all drawings smokebox 
chimney may px running loco 7.25 or 5" why £2250  

*SOLD*
******************************************************************************
#672
Posted: MAY
FOR SALE:  5 inch William Shakespeare (70004) and Galatea (5699) for 
sale. Both engines are original Winson kits and are complete. The locos have 
been built to kit 10 - cylinders, motion etc all on. The tender for W. S. is 
also assembled. The kits have been assembled to a high standard but due to 
lack of time and work pressure I am now looking to sell them. Offers invited 
around the 4 k pounds each. I would also consider something in working order 
as PX. Please e-mail for more info. 

*SOLD*
******************************************************************************
#671
Posted: MAY
WANTED:  3 1/2 inch gauge only Pacifics: LNER A3 and LMS Duchess - 
preference is for Clarkson designs - must be finely engineered and in 
excellent condition, not necessary that they be capable of being steamed - 
to add to collection of LNER A4, LMS Princess and BR Britannia.  
I travel to UK regularly so no problem in meeting interested seller.

martyn myer, Melbourne Australia 
martyn.myer :AT: merlyn.com.au
******************************************************************************
#670
Posted: MAY
FOR SALE:  5" gauge model of Rhodesian Railways Bayer Garratt. 
262/262 First Class condition. Open to offers. A powerful locomtive! 
See attached photographs.

Click for pic1...
Click for pic2...

*SOLD*
******************************************************************************
#669
Posted: MAY
WANTED:  3.5 inc gauge steam loco dont mind something old as long as 
it is in working order.

Gary Hancock, Essex, 01708 670 395 
garyhancockuk !AT! yahoo.com
******************************************************************************
#668
Posted: MAY
FOR SALE:  Immaculate Large Stuart beam engine Two cylinders with fully 
working goveners,Not sure of the model number or full details but its a very 
impressive engine that runs like silk on air.Many lovely details 14 inchs high.
Pictures and a short movie clip of it running available first to see will buy 
£895 

*SOLD*
******************************************************************************
#667
Posted: MAY
FOR SALE:  Hot Air engine ..This is a very high quality large engine 
engineer built loads of moving parts thats really nice to watch running..
Has its own power supply first to see will buy,Pictures and even a short 
movie clip available to see,,£550 

*SOLD*
******************************************************************************
#665
Posted: MAY
FOR SALE:  A Stunning 5" gauge "Twin sisters" 0-6-0 tank locomotive 
Class 2F,outside cylinders & Walschaerts valve gear,twin axle pumps with water 
by-pass,live steam injector, cab hand pump,rachet lub,brass wick axle feeders, 
copper boiler"brazed",Super heated,twin safety vales,a lovley steamer,comes 
with all irons and steam blower/raiser,digital images by request,can be seen 
in steam,you'll not be disappointed,£1650 ono.

*SOLD*
******************************************************************************
#662
Posted: MAY
FOR SALE:  This 5"gauge model of the B1 Springbok is built to a good 
standard though it has never been steamed,having spent all its life as a 
display model.The boiler is silver soldered copper though there is no 
documentation with it,however,all appears to be of a high standard of 
workmanship.The loco I would estimate is about 10/12years old. Unusually it 
has an axle pump driven by the rear tender axle. Price,£4750

Click for pic...

*SOLD*
******************************************************************************
#661
Posted: MAY
FOR SALE:  This 3.5"gauge loco is Clarkson's -"The Princess Royal" with 
the original Fowler tender. This model of  a "Lizzie" is extremely rare,the 
Duchess  class being the far more popular edition of Clarkson's LMS pacific 
range. There is slight damage to the model caused when it was not sufficiently 
well packed for transit. The paintwork on the tender,off side,has three patches 
rubbed down to the brasswork and the handrail on the boiler,nearside,has been 
slightly bent-see photograph. The loco has never been steamed having spent its 
entire life on display.A real collector's item-Price,£4250-Model Engineer Advert

Click for pic...

graham, birmingham 
jgj !AT! antiques26.freeserve.co.uk
******************************************************************************
#659
Posted: MAY
FOR SALE:  5  Gauge 4-4-2 Freelance tank engine  
  
Good steamer, a pleasure to drive, reliable and a good passenger-puller.  
Fitted with injector, handpump and axle pump. Sold with Boiler test cert,  
5  gauge, breaked driving trolley. Needs cab and Driving trolley finishing,  
please email for photo.  
  
Selling because moving to 7.25 Gauge.  
Steamed most weekends in the last two years at Meldreth and Saffron Walden.  
  
For further information please contact Mike on 07711 699 387  
£1,800VONO  

Mike, Cambridge UK, 07711699387
email reserved
******************************************************************************
#658
Posted: MAY
FOR SALE:  5" gauge A3 to old clarke design. i beleive flying scott 
70% built all most completed 4 wheel tender. chassie runs on air 
part made boiler 
this is a old build but would make a excellent model for somebody please email 
for pics and further info £2500 

also superb exibition standard part built 31/2" gauge 9F evening star 70% 
completed, tender finished comes with new pro built ellis boiler most of the 
machine work completed. for any body who would love a 9F and who has limited 
time to spend and equipment this is it, no tin ware on loco, best quality 
workman ship i have seen bar none. a snip at £2,000 

colin, Birmingham 
landjet !AT! aol.com
******************************************************************************
#657
Posted: MAY
WANTED:  7.25" electric or Petrol 2nd hand loco and/or coaches and/or 
track for newbie startingout.

Mark Cassidy, Ayrshire, UK, 07967147767 
mark !AT! barrmillfarm.co.uk
******************************************************************************
#656
Posted: MAY
FOR SALE:  7 1/4" Gauge Bulldog, Narrow Gauge 0-4-0 Shunter, Electric 
Locomotive, Powerful Four motor model, Satin Black, Very little used, c/w 
driving truck, also lots of aluminium track if required, Bargain £1595.

*SOLD*
******************************************************************************
#653
Posted: April
FOR SALE:  1" Scale Case traction Engine. Copper boiler, coal fired, 
feedwater pump, single speed w/ reverse and friction clutch. Model built 
exactly like full size engine. 20" long. Nice condition, excellent workmanship, 
average paint. Located in USA but easy to ship (approx. $300 US). 
E-mail for full photos. $4750 US

Tony Miller, Maryland, USA 
heirphoto !AT! aol.com
******************************************************************************
#651
Posted: April
FOR SALE:  71/4" Gauge Kerr Stuart Wren to Ken Swan design, chassis 
almost complete, new Cheddar Models professional built copper boiler injector, 
pressure gauge brass for saddle tank and some materials to complete ₤
3,500 ono. Photo available via e-mail on request. 

*SOLD*
******************************************************************************
#650
Posted: April
WANTED:  Simplex or Polly type engine preferably in good running order 
as I can only carry out minor repairs.

Nigel, Brighton 
nigel.dorrington !AT! kor13.com
******************************************************************************
#649
Posted: April
FOR SALE:  Model A Ford "Hot Rod" engine in 1/5 scale.  Beautifully 
built models ready to run.  This engine has dual replica Stromberg carbs, and 
finned head.  Contact me for more info and pictures. Price $1850 + $20 overseas 
postage.

Ted Maciag, Florida, USA, (US) 321 637 1708 
uncleted !AT! cfl.rr.com
******************************************************************************
#647
Posted: April
WANTED:  I am looking for an electric 5" Gauge Class 08 (diesel) 
Locomotive for my 12 year old daughter. Consider part finished, restoration 
project or completed model .

Garry, Portsmouth, UK, 01329 314675 
jet.black44 !AT! ntlworld.com
******************************************************************************
#646
Posted: April
FOR SALE:  2" Fowler ploughing engine 16n.h.p. by John Haining design, 
single cylinder, steel boiler with copper tubes, beautifully constructed,  
a display item for many years,two speed plus single speed winch, this is an 
extremely large engine for it;s scale, measuring some 48" in length by 19"wdth, 
this type of engine in this scale rarely comes on the market therefore an 
asking price of £4,500 or very near offer is realistic. 
no  certificated paperwork is  available with the engine, would cosider p/x 
for a vincent motorcycle. 0151 260 8401 Keith

Click for pic...

*SOLD*
******************************************************************************
#643
Posted: April
FOR SALE:  6" Ruston Proctor SD Traction engine only one year old 02 
registration. Boiler from Frankling and Bell the engine is fitted with a steam 
pump,injector,water lifter and vulcanised rubber tyre's. This is a very fast 
and powerfull engine and is only the size of a large 4" therefore easy to 
transport.  
 
£13,000 ono 

*SOLD*
******************************************************************************
#642
Posted: April
FOR SALE:  7 1/4" Gauge 0-4-0 electric loco and driving trolly £450 

*SOLD*
******************************************************************************
#641
Posted: April
FOR SALE:  3.5" LNER B1 95% complete needs a little pipe work & cab 
makeing, superb workmanship, boiler has a test cert.£900 

*SOLD*
******************************************************************************
#640
Posted: April
FOR SALE:  5" Gauge LMS 'Stove R' six-wheeled full brake coach. Body 
is 16 SWG mild steel with digitally punched windows and doors, complete with 
guttering strips. Wheels are all finish turned and complete with laser cut 'W' 
irons to suit a ground level ride on truck (or scale model). I have pictures 
and notes to complete this unique and interesting model. £200 ovno.

Mr.S.Probert, Northwich, UK, 01606 331874
steve.probert :AT: ouvip.com
******************************************************************************
#639
Posted: April
FOR SALE:  Garrett 4" Scale Traction Engine 
Part built to include: 
4" Steel Boiler completed/tested 
Smokebox/door with nameplate 
Hornplates complete with all bearings/rivets 
Eccentrics completed with straps 
Canon shaft machined and fitted 
Tender 90% complete with towing straps and bracket 
Some gear blanks machined/others 
Crankshaft and big end bearings on shaft completed 
Full set of drawings 
Other material for machining 
 
Offers required  
Your collection or could deliver at cost 

Pailton, West Midlands 
psmokebox :AT: aol.com
******************************************************************************
#638
Posted: April
WANTED:  5" loco wanted to start my garden railway must be good 
runner what have you also track 

kenny, broadford, isle of skye uk, 01471822631 
l.macnicol :AT: btopenworld.com
******************************************************************************
#637
Posted: April
FOR SALE:  Stuart Steam plant; Comprising of 
Excellent Stuart Hammer well detailed with steam oil feed 
Excellent Stuart 10V stationary engine with displacement lubricator.  
Gas fired vertical multi tube boiler. 
Hand operated  boiler water feed pump 
All above on wooden base with woode box cover and carry handle.
Excellent condition and working order. £875.00 

*SOLD*
******************************************************************************
#636
Posted: April
FOR SALE:  Tich 3.5" 90 - 95% complete 
Ametuer built model with most parts completed.  Chassis has been run sucessfully 
on air with good motion.  Only let down here is some slack in the con rods due 
to slightly off centre axles.  All plate work finished (needs assembly) most 
pipework done apart from superheater and boiler with an almost completed 
backhead (most fittings completed) 
 
Boiler was tested succesfully at home but not yet by a proper examiner (no cert) 
 
looking to buy a 45mm garden railway engine so offers in the region of 500 
or part exchange for finished / running loco

*SOLD*
******************************************************************************
#633
Posted: April
FOR SALE:  Caradoc Tractor 3" with ride on trailer built 97 used for 
about one season (owner deceased) Runs very well,Two speed, twin cylinder, 
Built by a professional model engineering company, Boiler certificate 
(Federation) expired, but a new one will be done shortly, Ready for the season 
ahead. Only for sale to create space for new build starting this winter. 
Email for pic's, Offers around £3.750 for quick sale 

*SOLD*
******************************************************************************
#632
Posted: April
FOR SALE:  Ruston Proctor 4" Traction Engine, Bill Newcombe design 
( now LMS) Just finished this year, will have a full boiler certificate shortly, 
well equiped engine with twin site glasses,boiler feed injector, pump, and 
hand pump. winch on nearside rearwheel, finished in Burgandy with black wheels 
on rubber. Only for sale to make space for new build starting this winter, 
Offers around £7,750 for quick sale, Email for pic's  

*SOLD*
******************************************************************************
#631
Posted: April
FOR SALE:  7-1/4g Marie Estelle 0-4-0 a Don Young design.  
Air tested chassis beautiful workmanship with castings and full professional  
boiler kit with flanged plates.  

This engine is being sold on behalf of a model engineers widow.  
It would make a super first model being quite small and atractive engine.  

Dick Durrant, Leicestershire, 0116 2885674 
richdurrant _AT_ aol.com
******************************************************************************
#630
Posted: April
FOR SALE:  Burrell 4 1/2" traction engine (agricultural)built to a very 
high standard to the "live steam models" design.Professionally constructed 
boiler(franklin and bell)hydraulic and steam test valid till 24 oct 2004.
All gearing professionally manufactured, same goes  for road wheels.
This engine is finished beautifully in fowler showmans red with vermillion 
wheels fully lined with lots of polished brass and copper.It is of a single 
cylinder design 2 speed with a very effective brake on second shaft and has 
all the usual features which "work":winding drum,injector, water lifter, crank 
pump,blower and mechanical lubricator.This engine is only recently finished 
and has only a half dozen steamings since it was painted so is in very fine 
condition and works perfectly.Comes ready to rally with a riding seat and a 
covered professionally built carrying trailer even a bundle of firing irons 
to play with.Engine can be seen in steam by arrangement and i can e mail pics 
to serious enquiries. 

PRICE £13500 including trailer  

paul stephenson, Stockton-On-Tees ,uk, 01642766237 
paul _AT_ stephenson27.freeserve.co.uk
******************************************************************************
#628
Posted: April
WANTED:  Help!!, Has anyone out there got complete A1 in 3/12" gauge, 
with or without boiler cert,must be nice workmanship,super cash waiting for 
the right loco,do ya best lads,no luck with the tender, so i'm trying the FULL 
MONTY,all the best.

Adrian Thompson, Hull,E Yorkshire, 01482 444194 
lesashnick _AT_ hotmail.com
******************************************************************************
#627
Posted: April
FOR SALE:  5" Gauge LNER V1, 2-6-2 Prairie Tank Locomotive, air running 
3 cylinder chassis, fitted out as follows completed smokebox c/w door, chimney, 
petticoat pipe and blast pipe. Drain cocks and mechanism, steam and parking 
brakes, stainless grate and ash pan, fwd/rev lever, completed buffers, all 
running boards and splashers, the whole loco is built to an extremely high 
standard. Professional boiler by Western Steam together with full certification 
as per post 2002, regulator fitted and all back head fittings supplied. 
Just needs side tanks, cab and bunker to complete, material for side tanks cut 
to size already. Also full set of drawings. Ill health dictates sale. Will 
cost the price of a sheet of brass and some panel work to finish.
First £2650 secures.

*SOLD*
******************************************************************************
#625
Posted: March
FOR SALE:  5 inch gauge part built RAILMOTOR 1. roughly 75% complete. 
most parts there. tender is complete. proffesiomaly built boiler with past 
hydraulic test certificate. £750

Lee Sutherland, Grangemouth. Scotland, 07708 531431 
leessutherland -AT- hotmail.com
******************************************************************************
#624
Posted: March
FOR SALE:  7 1/4 inch 'SWEET WILLIAM'. built to great standard. 
working steam heating. boiler cert recently expired. can be re certified if 
wished and can be seen running. the loco is BR Black and comes with sit in 
tender and a coal truck also in black. offers around £4500. 
phone for more details.

*SOLD*
******************************************************************************
#622
Posted: March
FOR SALE:  Attractive twin cylinder stationary engine. 
Photo available on request. £850 ono.

S.Banks, East Lancs, 01282 680944 
simon -AT- banks54.fslife.co.uk
******************************************************************************
#621
Posted: March
FOR SALE:  3.5" gauge GNR Atlantic loco (LBSC's Masie) in steam. 
New chassis and tender built to a good standard. professionally made boiler 
with certificate. Nice model, performs well. £1700 ono.

S.Banks, East Lancs, 01282 680944 
simon -AT- banks54.fslife.co.uk
******************************************************************************
#620
Posted: March
FOR SALE:  I have a couple of items for sale on behalf of a Widow of 
an ex-member of our Society. 

One is a 5" gauge 0-6-0 'Butch' locomotive. This is a fully built, and up till 
recently, operational locomotive. It has however suffered a boiler failure. 
It is being offered as such and will maybe need a new boiler. 
The asking price for this is a suggested £750. 

The second item is a 3½" gauge 9F, being built to LBSC's design we think. It 
comprises of a fully built Tender, painted without any lining etc. A part built 
chassis, probably better than three quarters finished, needing some valve gear 
parts. And a professional built boiler (Bishop-Ellis) 
There are unfortunately no drawings for this model. 
Once again the family are asking a suggested £750 for this set of parts. 
 
Viewing can be arranged, in the Heathrow Area. Contact me, Stan Bishop, on 
(01784) 241891 or 'e' mail

*SOLD*
******************************************************************************
#619
Posted: March
WANTED:  I am looking for a Small 7.25" engine simular to a Dart or 
bridget. Needs to be of a reasonable standard as i have no facilities 
currenty to repair or overhaul the engine. I can collect from most of the 
Southeast or Midlands. 

Robert, Essex 
rc0064222 -AT- ylueyonder.co.uk
******************************************************************************
#617
Posted: March
FOR SALE:  5 inch G GWR King Locomotive  
Tender completed to exhibition standard. Rolling chassis with inside cilinder 
block ,coupling rods and completed smokebox with chimney. Price £1350

*SOLD*
******************************************************************************
#616
Posted: March
WANTED:  streamliner A4 Gresley or A3 live steam pacific Swap or trade 
for My immaculate Landrover Discovery TD5 Turbo diesel GS 1999 T 102.222 miles 
with FSH large spec first to see will deal genuine collector,,,Value £11.000 
give me a try 

*SOLD*
******************************************************************************
#615
Posted: March
FOR SALE:  7-1/4 amercan locomotive 4.4.0. with cow catcher fitted vac  
brakes, stainles steel tener,bronze medal winner at 1999 model engineering 
exhibition. photo has beenin model enginer march 2000. show report and in 
january this year under knowl hill report, current boiler certificate. 
£5.750 

*SOLD*
******************************************************************************
#613
Posted: March
FOR SALE:  5" guage loco's for sale:- 
 
2-6-2 V-3 Enterprise, very good condition just passed its boiler test end of 
last year,very good runner a very tidy engine throughout excellent work horse 
can easily pull 15 adults,a reliable engine, injector works first time good 
axle pump never had a problem with. pictures on request. a great engine to 
start in 5" inch. 5,750 ono 
 
Standard class 4 2-6-4, another very good runner also has a boiler test end of 
last year, tidy engine, could pull around 20 adults, reliable injector axle 
pump and hand pump, steam operated drain cocks vaccum brakes all plumbed in. 
an old but well made model. pictures on request. 5,750 ono 

for more details and pics on either loco please e-mail

David Horsley, Reading U.K, Reading U.K 
horsley2k :AT: yahoo.com
******************************************************************************
#610
Posted: March
WANTED:  Model hot air engine. Heinrici or Robinson preferred but 
anything considered provided it's well engineered. If you can email a picture 
with some details that would be helpful. 

John Statton, Worcester, 01905 339155
john :AT: jstatton.fsnet.co.uk
******************************************************************************
#608
Posted: March
WANTED:  Looking for a smaller 3 1/2" gauge locomotive.  
Complete or very close to complete.  Thanks.

Rich, New Jersey, USA 
rg0752 :AT: aol.com
******************************************************************************
#607
Posted: March
WANTED:  Aster,Gauge1,A4 and stirling single,prefrably in unsteamed 
condition but any good examples considered. 

S.Tebbett, Bridlington,East Yorkshire., 01262 604721 
stuart :AT: tebart.fsnet.co.uk
******************************************************************************
#605
Posted: March
FOR SALE:  31/2"G black five as new condition good steamer for more 
info contact neil on 01738860126

neil, PERTH. SCOTLAND, 01738860126 
email reserved
******************************************************************************
#604
Posted: March
FOR SALE:  31/2G brittania lovely model good steamer for more info 
phone neil on 01738860126

neil, PERTH. SCOTLAND, 01738860126 
email reserved
******************************************************************************
#603
Posted: March
WANTED:  3-1/2" gauge a3 flying scotsman also duchess must be well 
engineered

neil, PERTH. SCOTLAND, 01738860126 
MAIL #AT# NEILBLACK.FSNET.CO.UK
******************************************************************************
#602
Posted: March
FOR SALE:  7 1/4" Gauge unfinished loco's for sale all good workmanship.  
Battery electric Tram running chassis with battery £1,000. 
Tom Thumb 0-4-0 air chassis with boiler shell £1,200. 
Marie Estelle rolling chassis, very little work needed for air chassis £1,500.

Dave, North Devon, 01271 850467 evenings 
dave #AT# roanoke.co.uk
******************************************************************************
#600
Posted: March
FOR SALE:  10 1/4" Gauge Royal Scot for sale. 
 
Built in 1976, Superb condition, only lightly used since 1990. Rebuilt by both 
Bob Moore and David Nicholson.  Ran at both Suffolk Wild life Park in 
Kessingland, and Trago Mills in Newton Abbot. 
 
This is a beautiful, and very big model loco!!, and it is currently in East 
Anglia. Give me a bell for all the rest of the info. Cheers, Simon

Click for pic 1...
Click for pic 2...

Simon Hudson, Chester, 0151 6485000 
simon #AT# grosvenorhouseclinic.com
******************************************************************************
#599
Posted: March
FOR SALE:  For sale 2" scale Thetford Town built as road loco. 
Copper Boiler current test certificate £5,250.00  
Telephone A. Duerden 01513423721 (Merseyside)

Alwyn Duerden, Merseyside, 0151 342 3721
email reserved
******************************************************************************
#598
Posted: March
FOR SALE:  3½" Gauge 0 - 6 - 0T  Rob Roy part complete comprising :- 
 
Professionally made, club certified copper boiler, superheater, 2 x safety 
valves, gauge glass, blower valve, smokebox tube, rolling chassis of coupled 
wheels, eccentrics, finish machined cylinders, steamchests, valves, pistons, 
rods etc, buffers, all remaining castings bar steam dome, cast grate, few bits 
of valve gear, clean drawings + "hard backed" book on how to build. Quality 
workmanship throughout. £400 

Click for pic...

*SOLD*
******************************************************************************
#595
Posted: March
FOR SALE:  Sweet Pea 5" gauge 0-4-0 excellent condition boiler 
certificate May 05 £2250 

*SOLD*
******************************************************************************
#594
Posted: March
FOR SALE:  7 1/4" gauge slate wagon, woden underframe with a metal 
slat framework. Complete with proper pedestal bearings and curly spoke wheels. 
Recently completly restored. Selling to raise money for my local club. 
Offers around £200. 

*SOLD*
******************************************************************************
#593
Posted: March
FOR SALE:  Rider-Ericsson Hot Air Pumping engine. 
Half Size i.e.18"diameter flywheel. 4"cylinder. In working order. Gas Fired.
£1,250.

Mr Eric Hughes, Denton Manchester UK,  
pameric *AT* onetel.com
******************************************************************************
#590
Posted: March
FOR SALE:  5" GAUGE SWEET PEA 0-4-2 ST  no cab roof, requires 
repair/resoration, with drivers truck/trolley

*SOLD*
******************************************************************************
#589
Posted: March
FOR SALE:  Part built 7.25" Midge 0-4-0 Great Western Dock Shunter 
- based on the Avonside engines that use to operate at Swansea Docks. 
 
The design is from the ME in the 1930's (I have a full set of drawings and 
all the articles). In exchange for your for your hard earned money you will 
get:- 
 
A well built rolling chassis with brakes fitted, tested on air and which 
operates nicely at 25psi. 
 
A boiler that has been tested to 2x hydraulic (The boiler comes with 
regulator, superheaters with wet and dry headers, fire doors and grate). 
 
Some boiler fittings (clacks, water gauge). 
 
Steam dome casting. 
 
Whistle cover casting. 
 
Erecting frame that allows you to turn the locomotive 360 degrees. 
 
All that is needed to complete is to finish the plumbing, clead the boiler, 
build the superstructure (tanks, cab etc) and the ashpan! Easy! 
 
Pictures can be found on www.stumpyweb.cjb.net and look for the link to 
"Midge".  If you want pictures of a particular part/area, please e-mail me 
and I'll see what I can do. Any questions - please e-mail me. Hope to hear 
from you soon. 

£2200 or near offer 

Why am I selling? My financial secretary tells me that I have to be 
financially neutral, so I pay for the part built Tinkerbell I've just bought!  
P.S. Happy to deliver a reasonable distance (120 or so miles) for the price 
of petrol/diesel (depending which car I use!) 

Peter Sheppard, Trowbridge, Wiltshire, 01225 753960 or 07971 590205 
midge *AT* puffer-nutter.co.uk
******************************************************************************

Return to Adverts Index Page