We can offer a repair service for inverters/converters and most type of electric motors as well as rewinds and machining.

DivisionMaster can work with a wide variety of rotary devices, and can be configured for any drive ratio between 1:1 and 5000:1. For a rotary table with a 90:1 worm drive, with a 200 steps-per rev stepper motor, the resolution is 1/100th of a degree per motor half-step; however, DivisionMaster would be equally happy working with other drive ratios, 40:1, 60:1 and 72:1 being other common ratios seen in commercially available indexing tools. DivisionMaster can also be configured for a wide variety of different stepper motors.

DivisionMaster has "multiple personalities"; 4 different sets of configuration parameters can be stored, allowing fast switching between different rotary devices that need different motor current settings, speeds, drive ratios etc.

DivisionMaster always calculates moves to the nearest motor half-step. This means that the theoretical positioning accuracy is always within a quarter of a motor step of the desired position; i.e., within 1/200th of a degree with a 90:1 worm drive ratio. Actual positioning accuracy will ultimately depend upon the mechanical accuracy of the rotary device. Positioning errors are not cumulative, but are spread evenly over a full rotation of the rotary axis. DivisionMaster can be used as:
- A stand-alone indexer, directly driving stepper motors at up to 2A/phase, or
-A stand-alone indexer, indirectly driving more powerful stepper motors via an external power stage, using the step-and-direction output signals it can generate, or
-A "slave" rotary axis motor driver for stepper motors up to 2A/phase, controlled by a parent CNC machine. This can be achieved by using step-and-direction motor control signals output by the parent machine's controller, or by using contact closure inputs that replicate the function of DivisionMaster's indexing command keys.

Full details and prices can be found on our website.

We keep a small stock of the following in 18" lengths:
plate,rods,tubes,bar out of Brass, Mild steel, plastic,copper, etc

We also have:
BA nuts and bolts etc
Rivetts etc
Machine tools etc
Drills ,taps & Dies etc

Also a small selection of used machinery for sale, millers, Lathes, Linishers, grinders, folders, rollers, rotary tables, indexers, drill chucks, micrometers, calipers, Verniers,etc

All our quality used equipment is aimed at the small model engineer right down to watchmakers lathes, we buy and sell Myfords, Unimats, Emco's, Raglans, Seniors, Centecs, well in fact almost anything that is to do with engineering on a small scale. If you have have something in mind you want to sell or buy, contact us, we are always interested.

We buy and sell small locos, unfinished items or complete.
We also do workshop clearances!
Everything is reasonably priced.

Milling machines
Saws
Grinders
Lathes
Fabricating
Miscellaneous

We also supply specialist model engineering services for items outside the capacity of your workshop or expertise. Services include turning, milling, boring, casting and welding.

We offer special rates for model engineers - let us know with your enquiry.

Anglo-Swiss Tools are also agents for the following Swiss made products:
Gepy high quality revolving centres and spindles.
Maprox six jaw chucks and workholding.
Tripan quick-change tool posts.
Supercoup parting blades.

Additionally DNC make replacement CNC monitors for Fanuc, GE Fanuc, Siemens, Mazak, Mitsubishi, and many more, as well as offering repair services to countless other manufacturers. Also GEC gemdrive axis controllers, GE Hi-ak drives, siemens dc and ac drive boards, GE 2000 pcbs, and also GE 1050 HL and HLX system boards, and replacement GE 2000 power supplies.

(Many Machines / items tooling ex-MOD). Our full stocklist can be viewed on our website: www.mantechayes.co.uk
To request further details, please e-mail Nicky Singleton (M.D)- nicky@mantechayes.co.uk (photos available for all stocked items)
Presently in stock - Hobbymat Lathe - model M545 240v @ £395 Denford Oraq 'CNC' Training Lathe, model: MWP84 240v @ £400 now / Myford Super 7, screwcutting gearbox @ £850 + VAT / Myford ML8 - woodworking Lathe with bowl-turning & grinding attachments, 240v @ £550 -Delivery additional cost, prices on request. VAT to add.

We also stock new & used inverters (3 phase to single phase), various bench & pillar drills, Turret Mills, Saws (Cut-off, Ripsaw & vertical/horizontal Bandsaws).
Part-exchange welcome on all purchases.

We are also looking to buy stock. If you have any Machines, workshop equipment (Compressors etc), lifting equipment or spares& tooling that are surplus to requirement- we offer prices which will not offend!
Thanking you for your perusal.

Many Fanuc Surplus Items Stocked Are On Long Deliverys From The OEM - Please Browse Our Lists Of Machine Tool Replacment Parts Including Indramat, Okuma, Mitsubishi Spares Which Change Daily - if we don't stock the parts what you need then please ask anyway - we have lots of contacts.

We BUY and SELL the following equipment
POSITIONERS
PROFILE MACHINE
SPOT WELDERS
TIG/MIG/ARC WELDERS
PLASMA CUTTERS
SUB-ARC POWER SOURCES/RECTIFIERS

Please contact us for our current stock list and any speciality requirements you may have.

Quick turnaround if required at a premium.

We do all our own Grinding work 'in house' on a Churchill 8' x 2' Slideway Grinder.

We cater for Industrial size Machines and Machines used by the Model Engineer. (From Myfords to Masiffs and Seniors to Bridgeports).

Quotations available on request by Telephone/Fax/Post or E-Mail.
All enquiries welcome NO JOB TOO SMALL!!!

Light engineering services are available such as milling, turning and fitting. Small batch work projects are also undertaken. Enquiries are welcome.

ALL at VERY LOW prices.
Mail order, cheque, credit/debit cards etc.

Measuring principle is an extemding stranded stainless steel wire with spring return, this makes the sensor extremely compact. This also means the whole DRO can be easily moved from machine to machine. All DRO's have multiple datum positions, pre-set a position, radius or diameter for a lathe, centre finding for a mill etc.

A unique option is the ability to recalibrate the sensor, typically for wrapping the measuring wire around a rotary table to make a dividing head, prime numbers of teeth now cause no problems. Accuracy is +/-0.002", repeatability better than 0.001", display resolution 0.0005" or 0.01mm.
Just past 10 years of trading, so they are tried and tested.

Instruments were manufactured from from the finest quality tool steel with all measuring faces and nibs hardened and tempered to resist wear. Vernier readings are 0.001" and 0.02mm. The Satin chrome finish provides exceptional clarity to the machine cut scales and verniers.

Manufacture of Benson measuring instruments stopped several years ago however a number of Factory new items remain available. These are priced at well below the original price, all are boxed.

Please see our web site for details of available stock

Based in Jarrow (Tyne & Wear) with easy access from both the A1 & A19. We can supply a range of new & used Tooling as well as used Machinery at affordable prices.

Choose from a range of branded Tooling , both new & used as well as popular makes of Lathes,Milling machines,Drill machines etc...

We welcome prospective customers to browse through our stock
We accept both VISA & MASTERCARD as payment
Phone,Fax or Email for your requirements
Monthly used Tooling & Machinery stock lists available
Photos of all machinery available by Email or Post

Machining Services. One Offs or Batches.

Turning..
Milling..
Grinding..
Spark and Wire Eroding..
Tool and Injection Mould Making..
Prototype Manufacture..
Call or send Paper Drawing or e-mail file for quotes..
See Web Site For GREATER DETAIL. .
Send for SPECIAL OFFERS LISTS.

Autodesk C.A.D product pricing starts at only £40 for "QuickCAD" an ideal starter package for acurate industry standard draughting.

Autodesk products are available from Authorised Autodesk Dealers and national Mail Order companies.

Enhance your creative and technical skills by using an autodesk product in your next design project.

Competetive prices for the "model engineer"
For more information or a list of prices please contact.

At cost delivery service available. Machinery taken in part exchange on selected models.

Appointed dealer for Newall digital readout systems, and Transwave converters - power three phase machinery from your home 240v supply!

Photographs of all machines for sale available via e-mail.

Main distributors and stockists of the ACRA range of home workshop and model engineering machines.
Used machine tools in stock usually include:
Harrison,Colchester,Senior,Boxford,Union,Denford,Elliott,Myford,together with a wide range of chucks,vices,arbors,small tools, accessories and spares.
Brass,bronze and gunmetal by mail order in 12" lengths.

Partners are ex.Harrison Engineers and are Administrators of 'The Harrison Owners Club'.For application forms and further information of this club s.a.e to the above address or 'e'mail your details or visit our web site.
Phone for list

We can advise / supply specialist products.

slot drills, end mills, carbide, brazed tools, drills, reamers, hand and power tools - and almost anything you can think of !

Of interest to the modeller will be our range of diamond dental burs, cutting discs and rotary burs.

If you have a requirement for anything diamond, we can probably help.

Pack A Contains all folded parts and drawings £99.00
Pack B contains all material for turned parts £27.00
Typical kit price £188.25 less jack.
Wheels, Castors, Jacks ect. available on request.
Including delivery, UK Mainland.

Lathes, milling machines, cutting tools (drills, taps, dies, mills, reamers etc.), precision measuring equipment, silver steel 1/8" to 3/8" (larger to order). We stock a good range of new and used books on related topics, and provide a competitive world-wide back-issue service for Model Engineer (1940 to date), Model Engineers Workshop, and Engineering in Miniature. Whether you are looking for single issues or complete volumes, ring us for a quotation. We are delighted to post any of our stock anywhere in the world (although a Myford by Airmail might be stretching things!).

The shop is on the eastern edge of the small East Devon town of Colyton, and we open 9.00am-1.00pm and 2.00pm-5.00pm Monday to Friday, and 9.00am to 5.00pm Saturday. If you would like to get the flavour of the shop have a look at Model Engineer No 4107 (19th November - 2nd December 1999) page 622/3.

Other local attractions: Seaton Electric Tramway - runs from Seaton up the beautiful Axe Valley to the Colyton terminus which is 5 minutes walk from the shop. Axminster Power Tool Company - 5 miles north-east Pecorama at Beer - small-scale model railway exhibition and shop, with superb gardens and live steam passenger-carrying miniature railway.

No more need to change pulley, do you suffer from low torque at low speed on your lathe. The SJ100 Hitachi inverter has full torque all the way down to 0.5Hz.

Single Phase Input 240V, Three Phase Output: 0.2kW - 2.2kW

Three Phase Input and Output: 0.4kW - 7.5kW

Please Phone or Fax Andrew Eastoe for full information and prices

Lathes, Milling Machines, Drills, Saws, Grinders, Shapers, plus many other types of machinery plus large stocks of tooling and accessories, together with spares, cutting tools, drills, reamers, taps and dies and much much more !!

Our warehouse which houses most of our stock is always full of equipment and located in the heart of the cotswolds, famous for its five valleys.

Our full itemsised stocklisting is available via our website, which is constantly being updated as new items come into stock.

Sole U.K. Distributor of the Sherline(USA)Miniature lathes and milling machines.Fast mail order service or personal shoppers welcome at our shop.

CBX (2 axis) $US 599
includes Display unit, 2 scales.

CBX-3d (3 axis) $US 749
includes Display unit 3 scales.

Secure On-line Ordering Now Avaiable.

We also carry a full line of tools and supplies for your machine shop, such as measuring tools, cutting tools, metal stock, abrasives, chucks, vises, and much more. Our full line catalog contains other machinery in a variety of sizes.

We will accept international orders but only with an international money order in USA dollars. Also, all shipping charges and insurance (and duty, if applicable) will be paid by the customer.

The B-CAM software is user friendly, only requiring a few hours to learn the basics.

Presented in an attractive hardwood box with accessories for end mills and slitting saws up to 12mm, price per unit is #41.99, and with an extra large accessory for end mills up to 25 mm, price per unit is #44.99. Price includes p&p and UK VAT.

We are currently developing a kit for a DIY CNC milling machine and other goodies. A site shall be created soon for the latest updates.